TATPROF solutions allow to realize the most challenging ideas of architects

Windows TPT-65


This series is designed to create entrance groups, stained-glass windows, suspended facades, window packages, doors in accordance with SNiP 2.03.06 “Aluminum Structures”, GOST 22233-2001 “Profiles extruded from aluminum alloys for translucent enclosure structures”, GOST 25116-82 “ Doors made of aluminum alloys for public buildings”, GOST 21519-2003“ Window packages made of aluminum alloys”, GOST 23747-88“ Doors made of aluminum alloys”. Typical components of stained-glass windows, doors, casements are developed based on aluminum extruded profiles of "65" series of TATPROF system.

Distinctive Features

Series 65 is the most technologically advanced assembly of products using modern angle and T-shaped connectors, which allow assembling the angle structure by means of dowel pins or using an angle-crimping machine. T-shaped connection of profiles is accomplished by turning the latches in the connectors. For assembly of items minimal processing is required.

To assemble structures minimal processing for door structures is required:

  • punch or drill holes for angle fixing screws;
  • cut out the grooves at the same time to install the lock and cylinder.

Detachable casement fastener that does not require profile processing for installation. Detachable profiles of the bottom door ledge doesn’t require processing of casement pillars and completely cover their edges, due to this air doesn’t enter into pillar chambers. Doors design allows using extruded embedded cut-to-size components (without milling) for angle fastening by crimping or using dowel pins.

It is also possible to use extruded embedded part for "dowel" fastening of imposts. Due to fastening of the doorsill, it can be replaced in operation without dismantling the structure. The 65 Series has several doorsill sizes for various operating conditions. Window series 65 has a base size of 65 mm for the frame and 73 mm for casements. The basic profiles of the series are divided into three standard sizes in height: 25 mm, 36 mm and 52 mm, which helps to optimize the projects under development.

Download documents